| 1 | Kopytov A. I., Voytov M.D., Tripus T.E. Calculation of tubular friction type bolt on carrying capacity. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2012; 4(92):8-10. (In Russ., abstract in Eng.). | MORE INFO | DOWNLOAD |
|---|---|---|---|
| 2 | Shram V.G., Kovalskiy B.I., Bezborodov Yu.N., Sokolnikov А.N., Nadeykin I.V. Influence of thermal decomposition products and the load on the wear properties of commodity and used engine oil M-8G2K. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2013; 2(96):53-58. (In Russ., abstract in Eng.). | MORE INFO | DOWNLOAD |
| 3 | Vereshchagin V.I., Kowalski B.I., Runda M.M., Shram V.G., Berko A.V. Influence of aging process engine oil RAVENOL VSI 5W-40 SM / CFon anti-wear properties. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2013; 5(99):91-97. (In Russ., abstract in Eng.). | MORE INFO | DOWNLOAD |
| 4 | Ordin A.A., Antonov J.A. The theoretical estimation of the body deformation influence to the force of rolling friction. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2011; 2(84):36-38. (In Russ., abstract in Eng.). | MORE INFO | DOWNLOAD |
| 5 | Kovalskiy B.I., Yanovich V.S., Runda M.M., Shram V.G., Lebedeva N.A. Investigation of the effect of oxidation products on the antiwear properties of mineral gear oil TS3p-8. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2011; 6(88):55-61. (In Russ., abstract in Eng.). | MORE INFO | DOWNLOAD |
| 6 | Gerasimenko S.V., Latyshenko M.P. Definition of nominal service term of dry friction bearings. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2010; 2(78):34-36. (In Russ., abstract in Eng.). | MORE INFO | DOWNLOAD |
| 7 | Cherdantsev N.V., Cherdantsev S.V. Determining the size of maximum hard zone of coal containing array aboard the reservoir of production development. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2014; 4(104):3-10. (In Russ., abstract in Eng.). | MORE INFO | DOWNLOAD |
| 8 | Maksimova E.N., Dvornikova L.T. The full kinetostatic analysis of the mechanism with the rolling lever. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2016; 1(113):136-140. (In Russ., abstract in Eng.). | MORE INFO | DOWNLOAD |
| 9 | Vozhakov I.S., Lezhnin S.I., Alekseev M.V., Bogomolov A.R., Pribaturin N.A. Gas outflow modeling into the high density environment. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2016; 5(117):86-92. (In Russ., abstract in Eng.). | MORE INFO | DOWNLOAD |
| 10 | Plotvina A.O., Neshev A.V., Cherkasova T.G. Research of market capacity, economic effect and possibility of replacement of repair components for repair of turbochargers on special-purpose vehicles of foreign production. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2017; 4(122):121-125. (In Russ., abstract in Eng.). doi: 10.26730/1999-4125-2017-4-121-125 | MORE INFO | DOWNLOAD |
| 11 | Kopitov A.I., Lebedev A.A., Utrobin B.A. Development of rational technology of supporting mine workings in rock bumps hazardous conditions. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2017; 5(123):10-14. (In Russ., abstract in Eng.). doi: 10.26730/1999-4125-2017-5-10-14 | MORE INFO | DOWNLOAD |
| 12 | Chernysh A.A., Yakovlev S.N. Experimental study of a dynamic module of polyurethane elastomers at reverse bending with rotation. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2018; 4(128):38-44. (In Russ., abstract in Eng.). doi: 10.26730/1999-4125-2018-4-38-44 | MORE INFO | DOWNLOAD |
| 13 | Kleptsov A.A. Method for definition of the parameters of surface layer based on functionality of parts. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2019; 1(131):22-28. (In Russ., abstract in Eng.). doi: 10.26730/1999-4125-2019-1-22-28 | MORE INFO | DOWNLOAD |
| 14 | Tomilo V.A., Bely A.N. Production of thin-wall composite anti-friction bushings using the longitudinal rolling method with roll speed mis-match. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2022; 2(150):12-18. (In Russ., abstract in Eng.). doi: 10.26730/1999-4125-2022-2-12-18 | MORE INFO | DOWNLOAD |
| 15 | Lyukshin V.S., Shatko D.B. Improving the process of sorting abrasives by shape . Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2022; 4(152):13-22. (In Russ., abstract in Eng.). doi: 10.26730/1999-4125-2022-4-13-22 | MORE INFO | DOWNLOAD |
| 16 | Zaydes S.A., Fedorov M.V., Grechneva M.V. Technology of restoration of the supporting surface of the side frame of a freight car without thermal impact. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2022; 6(154):14-23. (In Russ., abstract in Eng.). doi: 10.26730/1999-4125-2022-6-14-23 | MORE INFO | DOWNLOAD |
| 17 | Volosatov A.A., Panasenkov D.A., Arutyunyan G.A., Pashkov D.A., Zakrasovsky D.I. Modeling of thermodynamic processes in disc brakes of mining machinery using the finite element method (part 1). Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2024; 3(163):65-77. (In Russ., abstract in Eng.). doi: 10.26730/1999-4125-2024-3-65-77 | MORE INFO | DOWNLOAD |
| 18 | Volosatov A.A., Panasenkov D.A., Arutyunyan G.A., Sadovets V.Yu., Dubinkin S.D. Modeling of thermodynamic processes in disc brakes of mining machinery using the finite element method (part 2). Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2024; 3(163):78-87. (In Russ., abstract in Eng.). doi: 10.26730/1999-4125-2024-3-78-87 | MORE INFO | DOWNLOAD |
| 19 | Voyachek I.I., Kochetkov D.V., Groshev A.A. Features of forming contact of parts during assembly of a spiral friction-profile connection. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta=Bulletin of the Kuzbass State Technical University. 2024; 4(164):32-41. (In Russ., abstract in Eng.). doi: 10.26730/1999-4125-2024-4-32-41 | MORE INFO | DOWNLOAD |
This work is licensed under a Creative Commons Attribution 4.0 License.
Sites:
About the journal:
For authors:
Search: